EP500 Popping?
|
Joined: Apr 2010
Posts: 17
frequent flier
|
OP
frequent flier
Joined: Apr 2010
Posts: 17 |
Recently I adjusted the subwoofer output level on my NAD receiver because I wasn't getting the bass output that I wanted from my EP500. So I set the level to plus 5, and adjusted the volume on the EP500. However, I found that when I adjusted the sub output on my receiver, the EP500 occasionally made this popping noise from the cone during extreme LFE tracks. I thought it was just a fault with the audio track on this particular movie, but it happened on multiple movies. Does anyone have any suggestions?
I know that it is supposed to be impossible to clip an EP500, but that sure sounds like what is happening to me. I adjusted the sub level back to 0 on my receiver and that seemed to fix the problem, but it really makes me wonder.
This is my witty signature.
|
|
|
Re: EP500 Popping?
|
Joined: Feb 2009
Posts: 3,466
connoisseur
|
connoisseur
Joined: Feb 2009
Posts: 3,466 |
You could be clipping the output of the receiver. A clipped signal going into the sub will result in clipped output.
Pioneer PDP-5020FD, Marantz SR6011 Axiom M5HP, VP160HP, QS8 Sony PS4, surround backs -Chris
|
|
|
Re: EP500 Popping?
|
Joined: Sep 2004
Posts: 11,458
shareholder in the making
|
shareholder in the making
Joined: Sep 2004
Posts: 11,458 |
As usual, Chris is 100% correct.
::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
|
|
|
Re: EP500 Popping?
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
If you want more output from the sub turn IT'S volume/gain control up and try to keep the avr setting near zero. If this still doesn't give you what you want it is time for multiple subs or a bigger one or both.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: EP500 Popping?
|
Joined: Feb 2009
Posts: 3,466
connoisseur
|
connoisseur
Joined: Feb 2009
Posts: 3,466 |
Or just a new location. As many will tell you, with subwoofers, it's location, location, location.
Pioneer PDP-5020FD, Marantz SR6011 Axiom M5HP, VP160HP, QS8 Sony PS4, surround backs -Chris
|
|
|
Re: EP500 Popping?
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
Locating the sub in a corner is another potential way to increase it's apparent output. Have you tried the sub crawl? Maybe you are just listening in a dead spot in the room.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: EP500 Popping?
|
Joined: Sep 2008
Posts: 4,116
connoisseur
|
connoisseur
Joined: Sep 2008
Posts: 4,116 |
Recently I adjusted the subwoofer output level on my NAD receiver because I wasn't getting the bass output that I wanted from my EP500. So I set the level to plus 5, and adjusted the volume on the EP500. However, I found that when I adjusted the sub output on my receiver, the EP500 occasionally made this popping noise from the cone during extreme LFE tracks. I thought it was just a fault with the audio track on this particular movie, but it happened on multiple movies. Does anyone have any suggestions?
I know that it is supposed to be impossible to clip an EP500, but that sure sounds like what is happening to me. I adjusted the sub level back to 0 on my receiver and that seemed to fix the problem, but it really makes me wonder. Did you just purchase the EP500 recently? Supposedly on the newer EP500 individuals have noted they have to increase the pre-out signal significantly on the receiver to get the output they wanted. This was never a problem with the older amp versions. Certainly having the sub pre-out level set to +5 could produce this "pop". Turn down the sub pre-out to around +1 or +2 and turn up the gain control on sub to compensate (as much as you need). As for being impossible to clip the EP500, if you try hard enough you can get ANY sub to make unwanted sounds such as "flapping", "rattling" and "popping".
I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.
-Max Payne
|
|
|
Re: EP500 Popping?
|
Joined: Dec 2007
Posts: 7,786
axiomite
|
axiomite
Joined: Dec 2007
Posts: 7,786 |
As for being impossible to clip the EP500, if you try hard enough you can get ANY sub to make unwanted sounds such as "flapping", "rattling" and "popping". Not if the sub is DSP limited. That sub is happily running within its limits and reproducing exactly the signal fed to it. Bolt, you can sleep well tonight knowing that the EP500 is giving you the most accurate reproduction of receiver output clipping money can buy.
Fred
------- Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
|
|
|
Re: EP500 Popping?
|
Joined: Apr 2010
Posts: 17
frequent flier
|
OP
frequent flier
Joined: Apr 2010
Posts: 17 |
To answer a few questions;
I do have a newer EP500 (Purchased in the last two months)
I know I should do the subwoofer crawl, but my placement options are extremely limited, so I didn't bother. My house is not very ideal at all for audio.
As far as the gain is concerned, I had the volume turned almost all the way up and it was barely hitting. That's why I wanted it a little louder. I think I have it at a little more than 3/4 of the way up.
This is my witty signature.
|
|
|
Re: EP500 Popping?
|
Joined: Dec 2007
Posts: 7,786
axiomite
|
axiomite
Joined: Dec 2007
Posts: 7,786 |
I know I should do the subwoofer crawl, but my placement options are extremely limited, so I didn't bother. If you're seating area is in a bass null, turning up the volume, or even putting a second sub in the same location will make no difference. In a null, you have reflections that put sound waves in a given frequency out of phase, so they cancel each other out. Turn the volume up on your sub and you turn up the volume on the out of phase sound wave. If you can't move the sub, can you shift your seating a little to see if that improves the bass?
Fred
------- Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
|
|
|
Forums16
Topics24,967
Posts442,615
Members15,632
|
Most Online2,699 Aug 8th, 2024
|
|
0 members (),
982
guests, and
3
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|