![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Jan 2002
Posts: 3,270
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 3,270 |
Peter,
That's true in general what you say about the imaging but I suspect that in a room that large, if it also has a high or vaulted ceiling, all talk of timing and "imaging" go out the window because of the huge reverberant space. In one such room with a cathedral ceiling that housed an excellent pair of large Canadian floorstanding speakers plus two big subwoofers at one end and the couch at the other, I did some listening comparisons with several of my listening panel members from the National Research Council.
What was amazing was that when we switched from stereo to mono, none of us could hear any difference! It was simply a huge reverberant wall of sound.
In a related experiment conducted in more formal testing conditions (double blind) in the NRC listening room, we discovered that simply running a second set of left/right main speakers set a few feet farther apart to either side of the main pair of L/R fronts produced an amazing improvement in overall realism and spaciousness, something akin to what we now experience when we listen to a stereo recording in DPLII that decodes really well into 5.1. At the time, were testing very early digital and analog "bucket-brigade" delay systems that routed the main channel signals, delayed by an adjustable amount, to several surround speakers on the side walls. This was long before the advent of Dolby Digital or Dolby Surround.
The addition of the extra stereo pair of main speakers up front provided as much realism as the delay devices, which were quite expensive back in the early 1980s.
In a room that large, I'd say go ahead and try an extra pair of M80s or M60s set up as described. Depending on the room, it might deliver a noticeable improvement in spaciousness and realism.
The NRC test was done in a standard IEC listening room that parallels a typical domestic rectangular living room of average dimensions.
Alan Lofft, Axiom Resident Expert (Retired)
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Jan 2002
Posts: 3,270
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 3,270 |
pmbuko,
Thanks for the excellent diagram of series and parallel connections. I may have to borrow that for the next time I address this subject in the Axiom newsletter.
Alan Lofft, Axiom Resident Expert (Retired)
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Jan 2002
Posts: 3,270
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 3,270 |
Quote:
There really isn't much benefit to having double the speakers. There would be no gain in quality, unless m80's sound better at lower volumes for some reason (hence the combination of two at the same level would sound better). You could actually hinder some aspects of quality depending on placement. The amount of added spl would be minimal with only a 3 dB increase which is close to the threshold of a noticable difference in level. A doubling of sound pressure generates a 3 dB increase in level.
Cava, a modest correction: A 1-dB increase or decrease in SPL is the smallest (barely) detectable change in subjectively perceived loudness. A 3-dB increase is subjectively perceived by most listeners as "somewhat louder" (or "somewhat softer" if it's a 3-dB decrease in SPL).
Your other points I'd agree with.
Alan Lofft, Axiom Resident Expert (Retired)
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
You're welcome. I'll waive royalties in favor of QS4s. ![](/boards/images/graemlins/wink.gif)
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Good thought, Peter, but you should ask for QS8s and then maybe settle for QS4s.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
I should hang around with lawyers more often.
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Aug 2006
Posts: 33
enthusiast
|
enthusiast
Joined: Aug 2006
Posts: 33 |
Cava, a modest correction: A 1-dB increase or decrease in SPL is the smallest (barely) detectable change in subjectively perceived loudness. A 3-dB increase is subjectively perceived by most listeners as "somewhat louder" (or "somewhat softer" if it's a 3-dB decrease in SPL).
Your other points I'd agree with.
Yeah, I guess my definition of "close" was not close enough...haha. Although when I listen to one of those cd's that repeats a tone in 1 dB decreasing increments I can't really tell that each step is quieter, just that it definitely gets quieter after several steps.
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Jan 2002
Posts: 3,270
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 3,270 |
Cava,
It's much harder to detect small increments or decreases in loudness using single-frequency test tones. A pink-noise signal simulates a typical music signal much better, and it's a more critical test signal for loudness levels.
Some types of music make it easier to detect slight increases. But by definition, a 1-dB step is "barely detectable". I was just being my usual obsessive self. . .ha.
Alan Lofft, Axiom Resident Expert (Retired)
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Aug 2006
Posts: 33
enthusiast
|
enthusiast
Joined: Aug 2006
Posts: 33 |
I'm starting to realize that that is one of the reasons why I like this hobby so much. It allows me to obsess over little details, my OCD just eats it up, while my wallet coughs it up.
|
|
|
![](/boards/images/icons/default/book.gif) Re: Running two sets of mains
|
Joined: Mar 2005
Posts: 29
hobbyist
|
hobbyist
Joined: Mar 2005
Posts: 29 |
I think this article has pertinence to this thread. It is about the Audyssey EQ, but on page two they talk about a 10.2 surround format and only one channel is in the rear the rest of the channels are across the front sound stage. another Audioholic's article
|
|
|
Forums16
Topics24,958
Posts442,560
Members15,628
|
Most Online2,699 Aug 8th, 2024
|
|
0 members (),
2,259
guests, and
1
robot. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|