Axiom Home Page Forums General Discussion Technical Questions Anybody have the specs for the old EP350?

Jay. The boost is about the same in the two positions I tried (corner as opposed to wall loaded).

I should try to close mike the sub from the middle of the room to see what the curve is like.

To be honest I wouldn't be surprised if the 350 does go to ~20hz, it certainly feels that way. Like I said in another thread, even my 14yr old D-Box 10" could get near 20hz, just not with much authority, not that it had much authority anyway.

From specs (350v3):
Anechoic Resp. +/- 3dB 28 - 150 Hz
Room Resp. + 3dB/- 9dB 18 - 150 Hz

Yes I have the old v2 sub with the new v3 amp installed

I was speaking with Brent the other day about the differences between the 350 and 500. I hate trying to quote these kinds of details without really knowing what I am talking about. This may NOT be acurate. Both the 350 and 500 use the same driver and same enclosure. Both have the same specs and both go to the same depth. The 350 will not be level as it drops below a certain point and will lose impact. The 500 stays level as it drops and keeps that impact. Also the DSP will keep it clear with no distortion. This will be most noticeable at louder volumes. Plus the 500 has more power and can play much louder anyway. He also says that the 350 is a great sub.

Some of you must play your systems pretty loud with all of these subs!

Many subs doesn't mean they play them loud, they just have a very flat response, ie., all the seating positions start to get the same bass as the multiple subs help reduce/eliminate nulls.

Bob, this thread is actually centered around the older version EP350, which for the most part is completely different than the newer EP350v3.

Hey Rick,

I do understand what this thread is about. There was some other discussion intermingled that I commented on. Sorry.

No need to apologize whatsoever Bob, I just didn't know if you knew which version we were talking about (for the most part) ... now I know!

Cheers!