Speaker Cable In Wall For QS8s?
|
Joined: Dec 2003
Posts: 6,331
axiomite
|
OP
axiomite
Joined: Dec 2003
Posts: 6,331 |
OK. All you folks who have punched holes in your walls to run speaker cables for your QS8s or QS4s, I need your help.
I suppose I should explain what I'd like to do. From my receiver, I'll just run the cables along the baseboard until just below where the speaker will be mounted on the wall. I don't have a problem with that as the cables will be mostly hidden by furniture, etc. At that point I'd like to punch a hole right above the baseboard, run the cable up inside the wall and out through another hole so I don't have this ugly, 12 gauge, clear PVC insulated, bright copper wire dangling from a QS8 down the wall to the floor.
How the heck to do you do that? No, not punching the holes. That much I can do. But how do you fish the cables into the hole at the baseboard, then haul it up inside the wall, and get it out through the hole where the speaker will be mounted? As you might have figured, "handyman" is not an appellation easily applied to this klutz
I know about the cable concealers that one can pick up at Home Depot, and If I can't (or am too chicken) to get the cables into the wall, that's the way I'll probably go. But, even that option is less than desirable.
I'm also aware of the really flat wire that has an adhesive backing, and can be painted to match the wall. In fact, I have some. But, it is only 18 gauge. I don't think it's advisable to run 12 gauge from the receiver then splice it into 18 gauge for the run up the wall, is it? If I'm wrong, let me know and my problem is solved.
Any suggestions will be welcomed. Thank you.
Jack
"People generally quarrel because they cannot argue." - G. K. Chesterton
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Feb 2004
Posts: 23
hobbyist
|
hobbyist
Joined: Feb 2004
Posts: 23 |
Make a hole in the wall where you want the wire to come out for the speaker. Get a piece of string and tie a nut to the end. Drop the nut through the hole and fish it out at the bottom of the wall. Tie your speaker cable to the string and pull it back through
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Dec 2003
Posts: 692
aficionado
|
aficionado
Joined: Dec 2003
Posts: 692 |
That is provided you do not have intersecting joists between studs in the walls...then the open space between where the speakers are desired to be hung and the baseboard is not connected...get a stud finder first and see where all your wall studs are...
Also, if your walls have insulation in them, the nut on the string will not go far, as the insulation will impede it reaching the bottom...
An additional .02...
WhatFurrer
Last edited by WhatFurrer; 02/11/04 06:55 PM.
"Meddle not in the affairs of Dragons, for you are crunchy and good with ketchup..."
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Apr 2003
Posts: 5,236
axiomite
|
axiomite
Joined: Apr 2003
Posts: 5,236 |
Keep talkin guys. At some point this 10 thumbed dolt is going to try the same thing. I've also wondered how to do it.
So how do you get around the insulation and stud issues?
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Feb 2004
Posts: 23
hobbyist
|
hobbyist
Joined: Feb 2004
Posts: 23 |
Get a heavier bolt...seriously
Ive put lots of cables in insulated walls with the method I described. A heavy bolt or washer will slide down the wall between the sheetrock and insulation facing with little difficulty.
There are sometimes problems, things like cross framing and super tight insulation. I have a five foot long drill bit that I got at an electrical supply house. Its flexible, so its possible to drill a hole right through a cross member. It also has a hole near the end that will let you use it to attack a cord so when you pull the bit out the wire comes with it.
Its expensive (approx. $35), but sometimes there's no other way short of removing the wall.
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Jul 2002
Posts: 1,344 Likes: 1
connoisseur
|
connoisseur
Joined: Jul 2002
Posts: 1,344 Likes: 1 |
My insulation is blown in. It came after the fact as insulation in post WW1 wasn't much of an issue. I was thinking of using a thin metal rod to fish the speaker wire through it.
Does anyone know if Axiom's cable is rated for in-wall?
Getting to 2,000 posts; one year at a time vp160/qs8/qs4/SVS 2000/m60/Monolith 3x200 amp
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: May 2003
Posts: 2,185
connoisseur
|
connoisseur
Joined: May 2003
Posts: 2,185 |
yes, i've heard of the bolt and string method.
OR, you can try what my coworker did. Pull out the baseboard and run the wires behind it. He "gouged" a space big enough for his svid cable, but you can also drill holes to fish the wire through. When you're done, put the baseboards back, w/ some paint retouching. That'll also save you the trouble of having to worry about studs.
You can also try raceways if you're not comfortable going into the walls. These can be painted. I got a set from Home Depot.
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Dec 2003
Posts: 6,331
axiomite
|
OP
axiomite
Joined: Dec 2003
Posts: 6,331 |
pmbuko is the biggest NUT I know, but I don't think he'll fit through the hole!
Craig, if we screw this up, PM me your phone number and we can whine in unison.
Great guys. Keep it comin' I was just thinkin'. In the effort to use the heaviest nut I can, I'd probably drill 2" holes. Can you sense the disaster this could become?
I pretty sure my walls aren't insulated, but I don't know about cross bracing.
OY! I'm starting a cold sweat just thinking about this!
Jack
"People generally quarrel because they cannot argue." - G. K. Chesterton
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Dec 2003
Posts: 273
local
|
local
Joined: Dec 2003
Posts: 273 |
One simple piece of advice: use speaker wire color that's compatible with your room/carpet color. In some cases this makes a huge difference.
For example my HT room is very darkly colored, with almost black carpet. Initially I tried 14-ga clear insulated wire -- the bright copper color stood out like crazy, even for short runs to the main speakers. Then got some black speaker wire from Radio Shack, and it's almost invisible against the dark carpet.
I've seen white, black, clear (copper), and tan colored speaker wire. Maybe other colors exist. If you can get a fairly close match to your room/carpet color, it's like camouflage -- it's there but your eye just passes over it.
For Ajax's run up the wall I don't think that would be sufficient, but IMO for baseboard runs it can make a big difference.
|
|
|
Re: Speaker Cable In Wall For QS8s?
|
Joined: Jun 2003
Posts: 9
regular
|
regular
Joined: Jun 2003
Posts: 9 |
For isulated walls you can rent (OR BUY) a device called of all things "a fish". All it is a stiff wire on a spool that can be feed out or retracted. If you have an unfinished basement you can do what I did; From the basement drill a 1/2 inch or 5/8 hole up through the flooring material, through the bottom plate of wall framing and into the cavity between the appropriate wall studs. Make a small hole where you want the speaker wire to come out. With a friend at the speaker hole work from the basement with the fish until your friend can grab it in their fingers. (This can be frustrating, but keep trying) then pull a sting through with the fish and use the string to pull the wire.
This makes for a very clean installation
|
|
|
Forums16
Topics24,951
Posts442,537
Members15,623
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
972
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|