Re: Designing The Axiom Airplay Speaker
|
Joined: Jan 2006
Posts: 353
devotee
|
devotee
Joined: Jan 2006
Posts: 353 |
Andrew, the specs look good! Regarding your planned DLNA/UPnP implementation will it support: - gapless playback (SetNextAVTransportURI), and - For Synchronised Playback (Whole House / Multi Device) and you using the V2 DLNA additional expanded guidelines or antoher method? - What Declared Audio Support do you plan, eg: http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM http-get:*:audio/mpeg:DLNA.ORG_PN=MP3 http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMABASE http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMAFULL http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO http-wavetunes:*:audio/x-ms-wma:* http-get:*:audio/wav:* http-get:*:audio/x-wav:* http-get:*:audio/flac:* http-get:*:audio/x-flac:* http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO_320 http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO_320 http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320
Thanks Nathan
HT:M80,VP150,QS8,EP500 Outside:4xM3 Office:AudioBytes, Rumpus: M60,VP150,M22 Portable:2 x Airs
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Dec 2002
Posts: 75
old hand
|
old hand
Joined: Dec 2002
Posts: 75 |
Speaking of UPnP, I hope you will make certain that this feature is *not* exposed to the public internet, but instead strictly limited to the local network. Steve Gibson of grc.com provides perhaps the best advice ( https://www.grc.com/su/UPnP-Rejected.htm): Here's what you need to know about Universal Plug n' Play (UPnP): UPnP is a “zero-authentication” (no passwords required) system for allowing networked devices to discover and easily connect with each other on a private local network. Additionally, software such as Skype and BitTorrent, and gaming consoles, which wish to be “seen” on the Internet, are able to use UPnP to open “holes” through the protection normally provided by routers in order to allow “unsolicited” traffic to enter. THE HUGE MISTAKE IS: No part of UPnP was EVER MEANT to be exposed to the EXTERNAL public Internet. It was only ever meant for private local control of devices and routers. Its exposure gives malicious hackers direct access to the inside of any exposed private network. You probably know all this, but just in case...
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
Andrew, I think you've stunned everyone into silence. I'm with Charles, "ambitious" is what came to mind. Y'all are nerds. I think that (unlike Ray), I may have reached the point in my life where technology has become sufficiently difficult to keep up with that I don't try as hard to do so. And there is so much paradigm shifting! So, I guess the key question for me is, literally, how do you work this thing? I get the part about flinging stuff from my mobile device to the speakers - that part makes sense. What I'm having a hard time understanding is how to control playback when the content resides on a USB drive, NAS, etc. That whole "web based GUI" thing - and using it from a mobile device - is going to tell the tale for me. I also don't really understand this: Wireless WiFi hotspot for use outdoors and anywhere that a WiFi network is not available. Does this mean that even when I can't connect my AxiomPlay and my iPad (for instance) to the same wireless network that I will still be able to connect them to each other via wifi? Good luck. Can't wait to see what you guys do next. Apologies for the confusion Tom (and anyone else)! Basically, as you point out, the flinging or "pushing" audio from another device where the audio files reside to AxiomPlay puts all control in the hands of that device, including volume. If you want to play an audio file from a USB drive or your NAS, the WebUI (web user interface) is required in order to display the files as a library structure (using existing file tags), select which files to play and in what order (playlist functionality is included), start, stop, pause, and control volume. The same applies for internet radio where you can select a channel from a library and then start playback and adjust volume. The reason this must be done via the WebUI is that AxiomPlay is now acting as the SERVER for the files, so it must also be the controller. The WiFi hotspot is a really neat feature and something we are very proud of. Many times someone will want to take their AxiomPlay portable speaker to the dock, away camping, or maybe even to the garage where a WiFi network is not available. With the built-in hotspot you can still playback from any device, or control AxiomPlay with the WebUI simply by connecting to the hotspot WiFi address! It also works in an "auto-fallback" mode so that if your home's WiFi network goes out for any reason, you can keep on streaming music from your phone or tablet. We are planning to have a preliminary version of the WebUI on our site soon. This will allow you look at the layout and see how the display will render on your specific device. Thanks, Andrew
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
I also don't really understand this: Wireless WiFi hotspot for use outdoors and anywhere that a WiFi network is not available. Does this mean that even when I can't connect my AxiomPlay and my iPad (for instance) to the same wireless network that I will still be able to connect them to each other via wifi? That's what I'm assuming. If you take it to a picnic, you won't necessarily have a network available, so the AxiomPlay device can create its own which your phone/pad can then join. Correct! And anyone can join it, so your friends can start streaming their files from their own devices!
Last edited by Andrew; 09/22/14 09:02 PM.
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
Andrew, the specs look good! Regarding your planned DLNA/UPnP implementation will it support: - gapless playback (SetNextAVTransportURI), and - For Synchronised Playback (Whole House / Multi Device) and you using the V2 DLNA additional expanded guidelines or antoher method? - What Declared Audio Support do you plan, eg: http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM http-get:*:audio/mpeg:DLNA.ORG_PN=MP3 http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMABASE http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMAFULL http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO http-wavetunes:*:audio/x-ms-wma:* http-get:*:audio/wav:* http-get:*:audio/x-wav:* http-get:*:audio/flac:* http-get:*:audio/x-flac:* http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO_320 http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO_320 http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320
Thanks Nathan Hi Nathan, We are still working on the final parameters, but I can say that gapless playback is supported and will likely be a preset that can be selected if desired. The first version of AxiomPlay will not allow synchronisation, but the plan is to make that possible in a future release. Pretty much all audio file formats can be played back, except for encoded multi-channel formats like Dolby Digital or DTS. We are still in the process of testing as many file formats as possible, and so far I have not run into a file type that has not played correctly. Thanks! Andrew
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
Speaking of UPnP, I hope you will make certain that this feature is *not* exposed to the public internet, but instead strictly limited to the local network. Steve Gibson of grc.com provides perhaps the best advice ( https://www.grc.com/su/UPnP-Rejected.htm): Here's what you need to know about Universal Plug n' Play (UPnP): UPnP is a “zero-authentication” (no passwords required) system for allowing networked devices to discover and easily connect with each other on a private local network. Additionally, software such as Skype and BitTorrent, and gaming consoles, which wish to be “seen” on the Internet, are able to use UPnP to open “holes” through the protection normally provided by routers in order to allow “unsolicited” traffic to enter. THE HUGE MISTAKE IS: No part of UPnP was EVER MEANT to be exposed to the EXTERNAL public Internet. It was only ever meant for private local control of devices and routers. Its exposure gives malicious hackers direct access to the inside of any exposed private network. You probably know all this, but just in case... For sure UPnP will be locked down and not accessible outside of your local network. Thanks, Andrew
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Jun 2003
Posts: 8,488 Likes: 1
axiomite
|
axiomite
Joined: Jun 2003
Posts: 8,488 Likes: 1 |
bibere usque ad hilaritatem
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Jul 2006
Posts: 12,077 Likes: 7
Founder, Axiom Upgrade Club shareholder in the making
|
Founder, Axiom Upgrade Club shareholder in the making
Joined: Jul 2006
Posts: 12,077 Likes: 7 |
What Tom said. We are planning to have a preliminary version of the WebUI on our site soon. This will allow you look at the layout and see how the display will render on your specific device. Can't wait. I'm going to be merciless.
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Oct 2006
Posts: 6,955
axiomite
|
axiomite
Joined: Oct 2006
Posts: 6,955 |
Oh no. Does this mean a return of the Medusa Hand Bag? The Humanity!!!!
Since i'm going to go on the well deserved assumption that this will sound good, the feature set sounds like exactly what I'm looking for Andrew. I'm looking forward to to it's release.
With great power comes Awesome irresponsibility.
|
|
|
Re: Designing The Axiom Airplay Speaker
|
Joined: Jan 2006
Posts: 353
devotee
|
devotee
Joined: Jan 2006
Posts: 353 |
The first version of AxiomPlay will not allow synchronisation, but the plan is to make that possible in a future release.
Bummer, that is the part that is missing from all other DLNA devices on the market to date (well apart from sonic quality that I'm sure Axiom will deliver). In all my testing of DLNA devices, device drift is horrific and makes whole house audio unworkable. My understanding is that DLNA V2 spec allows this but needs a network based time clock that seems to have so far not been taken up by anyone. Thanks Nathan
HT:M80,VP150,QS8,EP500 Outside:4xM3 Office:AudioBytes, Rumpus: M60,VP150,M22 Portable:2 x Airs
|
|
|
Forums16
Topics24,995
Posts442,756
Members15,651
|
Most Online2,699 Aug 8th, 2024
|
|
0 members (),
768
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|