Re: ADA Noise Floor
|
Joined: Sep 2018
Posts: 241
local
|
OP
local
Joined: Sep 2018
Posts: 241 |
Thanks, but I don't have cable coax hooked up to any of my gear. Or can it still mess with my household ground circuit?
Axiom M5HP VP160 M3 ADA1000 Anthem MRX 720 SVS SB-3000 (dual)
|
|
|
Re: ADA Noise Floor
|
Joined: Jan 2007
Posts: 10,490 Likes: 116
shareholder in the making
|
shareholder in the making
Joined: Jan 2007
Posts: 10,490 Likes: 116 |
If the cable ground is conducting noise, the noise can couple into the ground circuit. You'll have to systematically rule out possibilities as I described above. Also make sure the ADA power cable is fully seated in the ADA.
House of the Rising Sone Out in the mid or far field Dedicated mid-woofers are over-rated
|
|
|
Re: ADA Noise Floor
|
Joined: Sep 2018
Posts: 241
local
|
OP
local
Joined: Sep 2018
Posts: 241 |
The Denon looks to be the culprit. If I remove the 3 RCA cables running between it and the ADA, the hum disappears. I noticed that the Denon uses a 2-prong wall plug, so no ground there, but it does have a 'SIGNAL GND' connection point at the back, which the manual states is "used to connect a ground wire for the turntable". I tried connecting a wire to that ground connection, and then touching the other end to various points on the ADA, but that didn't eliminate the hum.
Axiom M5HP VP160 M3 ADA1000 Anthem MRX 720 SVS SB-3000 (dual)
|
|
|
Re: ADA Noise Floor
|
Joined: Jan 2002
Posts: 1,462 Likes: 7
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 1,462 Likes: 7 |
Couple of random thoughts;
- Did you have this issue previously - you mentioned hiss but not hum?
- Is it possible to check the ground at the receptacle?
- You mentioned isolating to the Denon, but have you removed all inputs (dvd player and all cables) from the Denon and checked? I would also remove the trigger and check for the hum. If you find the hum is gone, begin adding the cables back and see when/if it returns.
- is the dvd player connected to the same receptacle as the denon and amp? - Do you have another set of RCA cables to test with? Highly unlikely, but I have experienced stranger things....
|
|
|
Re: ADA Noise Floor
|
Joined: Oct 2014
Posts: 656 Likes: 3
aficionado
|
aficionado
Joined: Oct 2014
Posts: 656 Likes: 3 |
My building has lousy grounding. The external cable grounding on my building {water mains} had been there so long the clamp and the cable were oxidised to the max. A new clamp cost me about 10/15 bucks. Had to cut the old clamp off for the new one. Another problem with this is they have been changing all copper piping to PVC. So could lead to False ground connections.
I also added new receptacle{PS Audio} with an extra ground line to the receptacles box. For me these made a great difference, especially on my noise floor.
Sadly there's no easy fix for such issues. Only process of elimination. Sometimes multiple fixes are necessary.
|
|
|
Re: ADA Noise Floor
|
Joined: Jan 2007
Posts: 10,490 Likes: 116
shareholder in the making
|
shareholder in the making
Joined: Jan 2007
Posts: 10,490 Likes: 116 |
"Sadly there's no easy fix for such issues. Only process of elimination. Sometimes multiple fixes are necessary."
Well said!
House of the Rising Sone Out in the mid or far field Dedicated mid-woofers are over-rated
|
|
|
Re: ADA Noise Floor
|
Joined: Jan 2002
Posts: 1,462 Likes: 7
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 1,462 Likes: 7 |
My building has lousy grounding.
Yes, industry learned a hard lesson when business systems installers grounded to the nearest fire sprinkler systems and that industry moved away from having the water supply heads loaded with water at all times...bad things happened man, bad things! I also added new receptacle{PS Audio} with an extra ground line to the receptacles box. For me these made a great difference, especially on my noise floor. If you can - and certainly for new builds/construction - I generally recommend dedicated circuits with isolated grounds be receptacle. The cost at build is negligible and can be worth cost later Sadly there's no easy fix for such issues. Only process of elimination. Sometimes multiple fixes are necessary. Agreed...but that is part of the fun isn't it? LOL
|
|
|
Re: ADA Noise Floor
|
Joined: Sep 2018
Posts: 241
local
|
OP
local
Joined: Sep 2018
Posts: 241 |
My building has lousy grounding.
Yes, industry learned a hard lesson when business systems installers grounded to the nearest fire sprinkler systems and that industry moved away from having the water supply heads loaded with water at all times...bad things happened man, bad things! I also added new receptacle{PS Audio} with an extra ground line to the receptacles box. For me these made a great difference, especially on my noise floor. If you can - and certainly for new builds/construction - I generally recommend dedicated circuits with isolated grounds be receptacle. The cost at build is negligible and can be worth cost later Sadly there's no easy fix for such issues. Only process of elimination. Sometimes multiple fixes are necessary. Agreed...but that is part of the fun isn't it? LOL I do have dual dedicated 20amp circuits for my gear. How does one isolate the grounds? My house has fibre lines coming in (one from Rogers, and one from Bell) in place of coax. Am I correct in thinking that fibre is immune to the kinds of noise that would be causing my issue? If I listen to the Denon itself, it seems to make a similar buzz internally. Could it be that the unit has a noisy transformer that the pre-outs are sensitive enough to pick up?
Axiom M5HP VP160 M3 ADA1000 Anthem MRX 720 SVS SB-3000 (dual)
|
|
|
Re: ADA Noise Floor
|
Joined: Sep 2018
Posts: 241
local
|
OP
local
Joined: Sep 2018
Posts: 241 |
I did also try removing all connections to the Denon. Even with only the pre-outs to the ADA connected, the buzz is still there
Axiom M5HP VP160 M3 ADA1000 Anthem MRX 720 SVS SB-3000 (dual)
|
|
|
Re: ADA Noise Floor
|
Joined: Oct 2014
Posts: 656 Likes: 3
aficionado
|
aficionado
Joined: Oct 2014
Posts: 656 Likes: 3 |
Ironically enough if you check out new Axiom vids. on You Tube. There's some new releases staring Andrew.
One regarding XLR vs RCA. In the vid. he mentions how a subwoofer connected to a different outlet can lead to issues. Also why not to use a balanced to non splitter. {It just cancels the balanced connection}.
Have you tried unplugging your Sub. yet Bman?
|
|
|
Forums16
Topics24,951
Posts442,537
Members15,623
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
972
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|